Create an IP route

Unisphere provides monitoring and management for Non-Volatile Memory Express (NVMe/TCP) directors, NVMe/TCP ports, NVMe/TCP endpoints, IP interfaces, and IP routes.

About this task

This topic covers the addition of an IP route for a NVMe/TCP director. Addition of an IP route for an iSCSI director is covered in the Create an IP route topic.

Steps

  1. Select a storage system running PowerMaxOS 10 (6079).
  2. Select System > iSCSI+NVMe and click the NVME tab to open the NVMe dashboard.
  3. Do one of the following: .
    • In the Actions panel, click Create IP Route.
    • Click IP routes and click Create .
  4. Select a director from the drop-down menu.
  5. Type a value for the IP address.
    You specify the IPv4 address in dotted decimal notation. You specify the IPv6 address in colon-hexadecimal format.
  6. Type a value for the Gateway IP.
    You specify an IPv4 or IPv6 address. You specify the IPv4 address in dotted decimal notation. You specify the IPv6 address in colon-hexadecimal format.
  7. Type a value for the Prefix.
    You specify an IPv4 prefix length value in the range of 1 through 30. You specify an IPv6 prefix length value in the range of 1 through 128.
  8. Type the value for the Network ID.
    Default value is 1. Valid values range from 1 through 16383.
  9. Click OK.